LOWEST SHIPPING RATE TO SINGAPORE VIA QEXPRESS AS LOW AS RM 30 !!!! S T A Y.....H O M E !......S T A Y.......S A F E !........S H O P.... F R O M....H O M E ! ......W E......W I L L......D E L I V E R.......F O R......Y O U ! ..........F O R E S T T R E K .........C Y C L E ..........C E N T R E
RM230.00
MUC-OFF ULTIMATE TUBELESS SETUP KIT - BUILT FOR - XC / TRAIL 23~25MM
Price RM230.00
Product SKU 20085
Brand MUC-OFF
Availability 2
Shipping Fee
Quantity
Description
Highlight

MUC-OFF ULTIMATE TUBELESS SETUP KIT - BUILT FOR - XC / TRAIL 23~25MM

MUC-OFF ULTIMATE TUBELESS SETUP KIT - BUILT FOR - XC / TRAIL 23~25MM

EVERYTHING NEEDED TO GET SET UP AND READY TO ROLL

Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.

WIDE RANGE OF SIZES AVAILABLE

Kits available for road, gravel and CX to enduro, trail and downhill.

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant.

With 5 available kits for:

  • Road/gravel/CX with shallow rims (44mm tubeless valves and 21mmx10m Rim Tape)
  • Road/gravel/CX with deep rims (60mm tubeless valves and 21mmx10m Rim Tape)
  • XC (44mm tubeless valves and 25mmx10m Rim Tape)
  • DH/Enduro (44mm tubeless valves and 30mmx10m Rim Tape)
  • DH Wide (44mm tubeless valves and 35mmx10m Rim Tape)
  • HOW TO

    1. Remove all old rim strip or tape and clean rim.
    2. Make sure the rim is clean and dry before applying tape.
    3. Get the tape from the packet and line it up from the opposite side of the valve.
    4. Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.
    5. Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.
    6. Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)
    7. Overlap the tape by roughly 10 – 15cm
    8. Leave a small amount unstuck so that you can cut the remainder off
    9. Once cut sketch and pull the tape down to create a seal
    10. Go around the rim with your thumb to make sure there is no air pockets or messed areas.
    11. Once your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve
    12. Grab your tubeless valve and remove the lock ring and o ring
    13. Chose the right rubber fitment for your rim tape and insert valve into rim
    14. Refit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)
    15. Re-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)
    16. Inflate tyre to create a fit (should hear some popping around the rim)
    17. Release Air and remove valve core using the spare valve cap
    18. Grab the sealant pouch and give it a shake
    19. Unscrew the cap and fit on the valve in a up right position
    20. While holding the pouch spin the wheel downward so that the pouch is now upside down
    21. Insert the sealant by rolling the pouch down
    22. Spin wheel back up right and remove pouch
    23. Reinsert valve core and inflate to your pressure

Reviews (0)
view all
back
0
0 reviews